plymouth (0.8.2-2ubuntu2common0omsk6) lucid; urgency=low

  * debian/rules: Provisionally add back initramfs support

 -- Michael Terry <michael.terry@canonical.com>  Fri, 11 Jun 2010 15:22:23 -0400

plymouth (0.8.2-2ubuntu2common0omsk5) lucid; urgency=low

  * debian/rules: add dh_installinit for plymouth-splash.upstart 

 -- Bill Filler <bill.filler@canonical.com>  Tue, 08 Jun 2010 10:41:45 -0400

plymouth (0.8.2-2ubuntu2common0omsk4) lucid; urgency=low

  * changes to disable plymouth from showing splash screen but allow it
    to start the daemon
    - debian/plymouth.upstart: comment out post-start script
    - added debian/plymouth.plymouth-splash.upstart: added blank file to 
      replace conf file left over from install

 -- Bill Filler <bill.filler@canonical.com>  Mon, 07 Jun 2010 15:04:52 -0400

plymouth (0.8.2-2ubuntu2common0omsk3) lucid; urgency=low

  * debian/plymouth.upstart: Re-add post-start.

 -- Michael Frey <michael.frey@canonical.com>  Fri, 14 May 2010 10:33:02 +0200

plymouth (0.8.2-2ubuntu2common0omsk2) lucid; urgency=low

  * debian/plymouth.upstart: Start on starting mountall
    Remove post-start script.  Not needed.

 -- Michael Frey <michael.frey@canonical.com>  Fri, 14 May 2010 10:20:25 +0200

plymouth (0.8.2-2ubuntu2common0omsk1) lucid; urgency=low

  * Rebase on lucid, remaining changes:
    - src/main.c:
      * Handle /proc not being mounted
    - debian/plymouth.plymouth-splash.upstart
    - debian/plymouth.plymouth-stop.upstart:
    - debian/plymouth.upstart:
      * Make Plymouth uxlaunch aware
      * Start on startup
      * Show splashscreen immediately
    - debian/plymouth.plymouth-log.upstart:
      * Start after plymouth started
    - debian/rules:
      * Don't install any initramfs scripts

 -- Michael Terry <michael.terry@canonical.com>  Wed, 05 May 2010 11:42:48 -0400

plymouth (0.8.2-2ubuntu2) lucid; urgency=low

  * Don't call ply_boot_client_process_pending_requests on flush, because
    ply_event_loop_process_pending_events already calls this for us when the
    fd is writable - so calling it again causes a race condition and an
    assertion failure if _process_pending_events has already cleared the
    event queue for us.  LP: #570289.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Tue, 27 Apr 2010 09:35:00 +0100

plymouth (0.8.2-2ubuntu1) lucid; urgency=low

  * src/main.c: if the splash screen isn't up yet, queue message requests
    instead of discarding them.  LP: #507881.
  * src/client/ply-boot-client.c: some replies may be sent out of order
    because they depend on user input, so pay attention to the message type
    when picking the handler instead of handing the response to the first
    handler in the list; without this, cancelling fsck in mountall will
    never work.  LP: #562811.
  * src/client/ply-boot-client.c: instead of trying to read from the server
    pipe if there are any outstanding requests, call
    ply_event_loop_process_pending_events() which already knows whether we
    can read from the pipe.  LP: #559761.
  * add the pixel display bpp symbols to libplymouth2.symbols with a correct
    version, so that packages using them don't wind up with overly-strict
    dependencies on libplymouth2.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Sun, 25 Apr 2010 16:15:37 +0100

plymouth (0.8.2-2) lucid; urgency=low

  * debian/initramfs-tools/hooks/plymouth: 'readlink -f' returns the
    original filename in the case of a non-existent file, so test for the
    existence of the filename it returns rather than merely whether it's
    non-empty.

 -- Colin Watson <cjwatson@ubuntu.com>  Fri, 16 Apr 2010 14:23:45 +0100

plymouth (0.8.2-1) lucid; urgency=low

  [ Steve Langasek ]
  * New upstream release.
  * debian/plymouth.plymouth-stop.upstart: trust the new kdm to stop plymouth
    for us, too.  LP: #540177.
  * plymouth needs to depend on initramfs-tools to avoid calling
    update-initramfs when the stack isn't configured yet and rendering the
    system unbootable with a broken initramfs.  LP: #358654.
  * src/client/ply-boot-client.c: ply_boot_client_flush() needs to process
    the incoming queue before the outgoing, otherwise we get a deadlock.
    LP: #554737.
  * src/plugins/splash/script/script-lib-image.c: call script_obj_is_null()
    to check for the presence of the alpha argument, otherwise all our labels
    are rendered invisibly...
  * src/plugins/renderers/drm/plugin.c: temporarily disable the drm backend
    for nouveau, until we can get to the bottom of the DRM lockup in bug
    #539655.  This is not as pretty, but it boots to the desktop without
    hanging regardless of how many displays are used, and that takes
    precedence.  LP: #533135.

  [ Scott James Remnant ]
  * Implement a Window.GetBitsPerPixel() function in the script library,
    and the necessary support in ply_pixel_display, ply_renderer and in
    the vga16fb and frame-buffer renderers to make that information
    available.  This will return "0" on drm and x11 where the answer is
    "lots".  LP: #558352.
  * Modify vga16fb to only fallback to reducing colors if it's overflowed
    the 16-color palette already, so if you stick to the same 16 colors,
    you can get exact matches.
  * Use alternate 16-color images when we have only 4bpp.  LP: #551013.

  [ Alberto Milone ]
  * ubuntu-logo: accept a format string from mountall for the disk check
    progress, so that localization is possible.  LP: #553954.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Thu, 15 Apr 2010 00:55:46 +0000

plymouth (0.8.1-4ubuntu1) lucid; urgency=low

  * Don't fail if --attach-to-session is passed and /dev/pts isn't mounted
    yet, as this breaks booting without an initramfs.
  * debian/initramfs-tools/hooks/plymouth: if we don't have a default.plymouth
    link, don't try to copy the graphics support since the libs aren't needed
    and may not even be installed.  LP: #554566.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Sat, 03 Apr 2010 17:25:50 -0700

plymouth (0.8.1-4) lucid; urgency=low

  [ Steve Langasek ]
  * debian/libplymouth2.apport: include the targets of the theme alternatives
    in the report.

  [ Colin Watson ]
  * Split /lib/plymouth/label.so out into a new plymouth-label package,
    depended on by the themes that use it.

 -- Scott James Remnant <scott@ubuntu.com>  Thu, 01 Apr 2010 14:03:16 +0100

plymouth (0.8.1-3) lucid; urgency=low

  [ Colin Watson ]
  * Pass the single-debian-patch option to dpkg-source.
  * frame-buffer/vga16fb renderers: It's possible for activate to be called
    before map_to_device, for example if a non-graphical splash plugin is in
    use.  Initialise map_address to MAP_FAILED so that we won't try to
    redraw in this situation.

  [ Scott James Remnant ]
  * Add a ply_boot_client_flush() method to flush outgoing requests
    before we exit()
  * vga16fb: move the VGA register resetting into the flush_head call
    rather than VT activation, since we may not have permission to
    fiddle with the VGA at that early point.

 -- Scott James Remnant <scott@ubuntu.com>  Wed, 31 Mar 2010 19:31:35 +0100

plymouth (0.8.1-2) lucid; urgency=low

  * Quit Plymouth on initramfs panic.

 -- Evan Dandrea <evand@ubuntu.com>  Tue, 30 Mar 2010 11:13:37 +0100

plymouth (0.8.1-1ubuntu3) lucid; urgency=low

  * configure.ac, src/plugins/renderers/Makefile.am, debian/rules,
    debian/plymouth.install.in: if sys/io.h is absent, as on powerpc or sparc,
    omit building the vga16fb renderer.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Mon, 29 Mar 2010 04:52:22 +0000

plymouth (0.8.1-1ubuntu2) lucid; urgency=low

  * Make sure all the plymouth themes declare Replaces: plymouth (<< 0.8.1-1~)
    to give a smooth upgrade.  LP: #549701.
  * Add Breaks: against the old versions of the out-of-tree plymouth theme
    packages.
  * Recommend plymouth-theme-ubuntu-text | plymouth-theme, to avoid pulling
    in a theme at random.  LP: #550237.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Sun, 28 Mar 2010 15:36:41 -0700

plymouth (0.8.1-1ubuntu1) lucid; urgency=low

  * ubuntu-logo theme:
    - move the entry box below the passphrase prompt where it belongs.
      LP: #540685, #540806
    - add some code to notice if our text boxes are going to run off the
      bottom of the screen, and move them up in that case.
  * debian/initramfs-tools/hooks/plymouth: fix to work with the new
    update-alternatives theme handling. LP: #549247
  * include the vga16fb renderer in the initramfs.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Sat, 27 Mar 2010 01:20:26 +0000

plymouth (0.8.1-1) lucid; urgency=low

  [ Scott James Remnant ]
  * Update to the upstream 0.8.1 release:
    - Our patches have been merged upstream, some changes due to cleaning
      them up for submission and noticing a few bugs along the way.
      Remaining changes are:
      + ubuntu-logo theme
      + ubuntu version of the text theme
      + call update-initramfs rather than plymouth-update-initrd in
        plymouth-set-default-theme
      + filter fsck progress updates from the progress bar tracker
      + watch for enter key press
      + support lbm-nouveau as an alternate driver name for nouveau to
        permit backports once Lucid has released
      + use /dev/fb0 as default framebuffer device name
      + stop animation of script plugin in idle function
    - Will become process group leader of its VT if possible (opens without
      O_NOCTTY when redirecting stdio to it), this is almost certainly
      correct keyboard-wise.
    - Deallocates VT on "plymouth quit" after switching VT back to VT1
    - Open terminal in text and details plugin, don't assume it's already
      open.
    - Calling "plymouth quit" or "plymouth deactivate" while the same
      command is already running will now block the new command until the
      old one complete, rather than returning immediately.
    - Various window fixes for script plugin
    - Script plugin updated to use the window X and Y offsets every time
    - Plymouth client tool has been updated to have commands for many cases
      in preference to the --command style.

  * Restored code to disable Plymouth's graphical plugins when an alternate
    init= is given on the kernel command-line, otherwise init=/bin/bash
    doesn't work so well when Plymouth is in the initramfs.
  * Restored crash handler that dumps boot messages to /dev/tty1.

  * Split themes out into different packages, reducing the size of the
    Plymouth package.  This also means that you can remove the themes
    packages to remove the "graphical splash" part of Plymouth while keeping
    the ability to prompt for questions on the console.
  * Use the alternatives system to select the default themes.  The existing
    symlink will be replaced on upgrade if you have not changed it.
  * Also use alternatives to select the text theme.
  * Restore the upstream text theme, renaming ours to "ubuntu-text".
  * Fallback to the built-in details theme (boot messages on console, but
    with the ability to prompt for questions) if no theme package is
    installed.
  (LP: #507238)

    Unfortunately these changes mean that if you've selected a custom
    theme, you will need to install that package and select it again.
    Sorry about that.

  * Include the 16-color VGA frame-buffer renderer.  LP: #526892.

  * Fix text, ubuntu-text and details themes to restore the console to text
    mode when adding text displays.

  * debian/rules:
    - Set default tty for boot and shutdown with configure arguments
    - Set default background color to the Ubuntu Aubergine, this provides
      some consistency with other default themes.
  * debian/plymouth.upstart, debian/initramfs-tools/scripts/init-top/plymouth:
    - Redirect console output to Plymouth, this will be both logged and made
      available to splash themes that want it (details by default).
      LP: #535108.
  * debian/plymouth.upstart, debian/plymouth.plymouth-splash.upstart:
    - Call show-splash from the plymouth script itself in the shutdown case.

  * ubuntu-logo theme:
    - Update in same manner as script has been to add Window.GetX() to
      math that centers things.

  [ Steve Langasek ]
  * ubuntu-logo theme:
    - fix the password prompt handling so the display of boot messages is
      restored after the passphrase has been entered, and subsequent password
      requests don't incorrectly reuse the previous prompt.  LP: #515822
    - turn the message_notification[0].y check right-way-round in
      password_dialogue_setup(), though this doesn't seem to have any
      practical impact.
    - pass logo.z to the SetZ() function, not the SetY() one; thanks to
      Vishal Rao for this catch.  LP: #542458.
    - refactor get_message_label: the y position of the second line shouldn't
      vary according to its own height.  This brings the passphrase prompts
      from cryptsetup back up to where they should be.  LP: #539723.
  * Turn tracing on post-beta.
  * src/main.c: when the user presses enter, compare the keystroke lists to
    the enter key, not to some previously-typed string that we may or may not
    have.

 -- Scott James Remnant <scott@ubuntu.com>  Fri, 26 Mar 2010 18:52:37 +0000

plymouth (0.8.0~-17) lucid; urgency=low

  [ Scott James Remnant ]
  * src/libply-splash-core/ply-terminal.c:
    - To restore a terminal into Canonical Mode, rather than setting flags
      that happen to be the opposite of what cfmakeraw() removes, set the
      flags that stty's sane mode sets.
    - Ensure that we clear the "is unbuffered" flag on every exit path from
      ply_terminal_set_buffered() that means the terminal is Canonical Mode
      so that we don't reset it back to Canonical Mode again unexpectedly
      when closing out the terminal under X.
    LP: #540256.

  [ Steve Langasek ]
  * src/main.c: allow clients to watch for <enter> as a keystroke.
    LP: #539182

 -- Scott James Remnant <scott@ubuntu.com>  Wed, 17 Mar 2010 22:36:47 +0000

plymouth (0.8.0~-16) lucid; urgency=low

  * src/libply-splash-core/ply-text-display.c:
    - It turns out that resetting the VT back into KD_TEXT mode every
      second, while the X server is starting, is not perhaps the best
      idea.  LP: #538213.

 -- Scott James Remnant <scott@ubuntu.com>  Wed, 17 Mar 2010 03:28:03 +0000

plymouth (0.8.0~-15) lucid; urgency=low

  * debian/plymouth.upstart, debian/plymouth.plymouth-stop.upstart:
    - Replace the "stop on" clause in plymouth's own job with a job that
      handles stopping plymouth for the normal cases.

      For a display manager that handles the plymouth transition properly
      (gdm & ubiquity only at this point), this simply appears to be running
      until plymouth is stopped by that display manager.  This blocks plymouth
      from being stopped for other reasons, e.g. rc2 exiting.  LP: #538214.

      For other display managers, and when we reach the end of rc2 or
      other reasons, this simply asks plymouth to quit.  We never use
      --retain-splash, if the display manager can't do plymouth transitions,
      we never want to leave the VT in KD_GRAPHICS in case the display
      manager gets things wrong (hi, kdm!).  LP: #538524.
  * debian/plymouth.plymouth-splash.upstart:
    - Add LXDM.  LP: #526748

  * debian/plymouth.plymouth-splash.upstart:
    - Remove the "starting gdm" bit from the job, since that won't have any
      effect (job is already started by the time gdm is); and as a result of
      the above changes could end up with plymouth --show-splash and quit
      being called together if someone runs "start gdm" themselves.

 -- Scott James Remnant <scott@ubuntu.com>  Wed, 17 Mar 2010 01:19:37 +0000

plymouth (0.8.0~-14) lucid; urgency=low

  * Add Breaks: against old versions of mountall and casper, due to the soname
    changes in ~-13.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Fri, 12 Mar 2010 12:27:50 -0800

plymouth (0.8.0~-13) lucid; urgency=low

  [ Steve Langasek ]
  * Don't attach /proc/cmdline to apport reports, this is already in the
    standard info that gets collected...

  [ Alberto Milone ]
  * ubuntu_logo theme:
    - New logo from Otto Greenslade.
    - Switch off dots starting from the ones on the left instead of
      switching them off all at once.

  [ Scott James Remnant ]
  * Move the Ubuntu logo up as discussed with Otto, this makes the mouse
    cursor appear between the logo and dots and solves the optical illusion
    of the logo being too low.  LP: #535014.
  * Don't include message about disk checks, which can come from mountall.
  * Drop the rc script splash functions, we don't want the SysV-rc compat
    stuff messing around with the splash screen - this can be entirely
    managed by Upstart now.  LP: #528787, #537262.

  * Plymouth Fix Mega Patch:
    - This hasn't yet been broken up into enough bits to send upstream, and
      doesn't *quite* address all the issues yet, but it's a major step.

    - Rewrite the VT handling, rather than abusing /dev/tty0 keep all VT
      operations on the actual VT (tty7), this avoids issues where we set
      the graphics mode of the wrong VT or put the wrong VT into VT_PROCESS
      mode.  LP: #520460, #522598, #526321, #533135
    - Don't attempt VT switch when using non-VT consoles.
    - Make VT mandatory for renderer plugins, so we fallback gracefully to
      text when the console is not a VT.  LP: #516825, #527083.
    - Restore VT when finished displaying the splash unless plymouth quit
      is called with --retain-splash.  LP: #506297.
    - Activate VT from text and details plugins, rather than haphardly in
      the main code, this means the textual boot is also on VT7.
      LP: #518352, #520122.
    - Add a --has-active-vt command that can let gdm inquire whether it
      should reuse Plymouth's VT; fixes the issue where Plymouth has no
      visible splash screen and X ends up on VT1.  LP: #519641, #533572.

    - Don't open terminal device in X11, fixes the issue where X will crash
      when debugging plugins using the X11 renderer.
    - Add --tty option to plymouthd for debugging when X is running and
      thus using an alternate VT.

    - Improve deactivate command so that the terminal is no longer watched
      for keyboard input, session is closed, etc.  LP: #528787, #531650.
    - Ignore mode changes while deactivated, otherwise we can end up
      resetting the VT back into text mode while X is starting up.
      LP: #523788, #502509.

    - Fix races with simultaneous quit and deactivate commands, or multiples
      of those commands.
    - Ignore --show-splash, --hide-splash, etc. commands while deactivated.
    - Add reactivate command for testing purposes.

    - Don't scan out drm buffer contents to fbcon when not called with
      quit --retain-splash.  LP: #527180.

    - Avoid resetting the terminal to unbuffered mode on every write, this
      results in setting X's VT into raw mode and results in the X server
      crashing on key presses.  LP: #532047, #534861, #519460, #520593,
      #522974, #525393

  * I'm aware that if you see the TEXT plugin, it's possible for Enter to
    still crash the X server for some people.  I will be opening a new bug
    for this, and would appreciate details from people affected.

  * If you have issues with Enter crashing the X server, and you see a
    GRAPHICAL plugin, check that gdm is up to date - if it is, please
    file new bugs.

  * I'm also aware of an issue where after boot, rather than seeing an X
    server, you see the ordinary "login:" getty screen.  Pressing Alt+F7
    should take you to X.  I will be opening a new bug for this, and would
    appreciate details from people affected.

  * Don't send fsck progress updates to the boot-duration file.
  * Make all the dots orange just before starting the X server.

  * Cute text-version of the splash screen.
    - Added basic support for fsck notification.
    - Added support for showing keys information on separate lines.

 -- Scott James Remnant <scott@ubuntu.com>  Fri, 12 Mar 2010 19:02:54 +0000

plymouth (0.8.0~-12) lucid; urgency=low

  * ubuntu_logo theme:
    - New logo from Otto Greenslade.
  * debian/rules:
    - Disable tracing.

 -- Alberto Milone <alberto.milone@canonical.com>  Thu, 04 Mar 2010 17:31:41 +0100

plymouth (0.8.0~-11) lucid; urgency=low

  * ubuntu_logo theme:
    - New logo, colours and simplified design in compliance with the
      artwork and with the guidelines provided by Otto Greenslade.
  * Add support for additional separate places for messages (LP: #497311).

 -- Alberto Milone <alberto.milone@canonical.com>  Fri, 26 Feb 2010 11:27:26 +0100

plymouth (0.8.0~-10ubuntu1) lucid; urgency=low

  * Merge from upstream:
    - change plymouth-set-default-theme help output
    - include upstream manpage (LP: #518414)
  * Add an apport hook to collect /proc/fb and /proc/cmdline.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Thu, 18 Feb 2010 01:24:34 +0000

plymouth (0.8.0~-10) lucid; urgency=low
 
  * Add lbm-nouveau/plymouth integration patch.
 
 -- Robert Hooker <sarvatt@ubuntu.com>  Wed, 10 Feb 2010 23:29:41 -0500

plymouth (0.8.0~-9ubuntu1) lucid; urgency=low

  * Make plymouth-splash a service instead of a task, to make sure we only
    run it once per instance of plymouthd; and add an 'or starting gdm' to the
    start condition so that we're assured of having this command run before
    gdm starts - otherwise, this plays havoc with gdm's assumptions regarding
    initial VT selection.  LP: #516412.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Wed, 10 Feb 2010 16:08:56 -0800

plymouth (0.8.0~-9) lucid; urgency=low

  * move plymouth-log-viewer to plymouth-x11 also, to completely move GTK out
    of the base package.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Fri, 05 Feb 2010 17:37:37 -0800

plymouth (0.8.0~-8) lucid; urgency=low

  [ Steve Langasek ]
  * Include label.so in the initramfs, as well as the font support files it
    depends on, needed for any text prompts or messages.  This will bloat the
    initramfs substantially (about 3MB) and impact boot performance as a
    result, but the solution to that is to not include plymouth in the
    initramfs unless we know it's needed for prompting (e.g., cryptsetup).
    LP: #496765.
  * Move x11 renderer into a separate package, to avoid pulling GTK into the
    server install by default.  LP: #509579.
  * debian/rules: fix up the dh_makeshlibs exclude path to match where we're
    currently installing.
  * src/plugins/splash/script/plugin.c: the script plugin has no support at
    all for text consoles, so if there are no pixel displays available,
    return an error so that plymouth can fall back to the text plugin.
    LP: #506717.
  * Always include the 'details' and 'text' themes in the initramfs, since
    plymouth uses these as built-in fallbacks and they're tiny.
  * src/main.c: when a splash plugin fails to load, make sure to unregister
    any related keyboard handlers.
  * don't let the password walk off the end of the dialog box.  LP: #496782.
  * split the plymouth upstart job into plymouth and plymouth-splash, so that
    plymouth starts up early and doesn't have to race gdm; and stop
    unconditionally adding plymouth to the initramfs now that we can start it
    this way.
  * debian/plymouth.postinst: also set the theme on first install, or on
    upgrade from versions prior to 0.8.0~-7, because update-initramfs called
    before plymouth has been configured for the first time will accidentally
    cause a call to --reset to use the text theme instead of the intended
    default.
  * debian/plymouth.plymouth-splash.upstart: don't wait on tty-device-added,
    these are now guaranteed to be available; copied from gdm upstart job.
  * Depend on mountall (>= 2.0) to ensure we have the above guarantee.
  * Mark /usr/share/initramfs-tools/scripts/init-bottom/plymouth executable,
    otherwise initramfs-tools skips it.  LP: #509487.
  * Drop the Debian revision (-1) from the version in the symbols file, to
    fix a lintian warning.

 -- Steve Langasek <steve.langasek@ubuntu.com>  Tue, 02 Feb 2010 08:11:47 +0000

plymouth (0.8.0~-7) lucid; urgency=low

  * Fixed a bug where we couldn't load the script plugin if it were
    compiled without optimisations.
  * Attempt to work around issues with VT switching and fbcon reasserting
    over our output.  LP: #496784, #497115.
  * Don't attach to the session for now, this code path doesn't work with
    the current console/VT code.  LP: #502494.

 -- Scott James Remnant <scott@ubuntu.com>  Mon, 11 Jan 2010 13:47:36 +0000

plymouth (0.8.0~-6) lucid; urgency=low

  * Revert change in 0.8.0~-4 that scans the buffer out fo fbcon when
    deactivating i915; this was actually wrong, we don't want to use fbcon
    for the transition, we want to use our current framebuffer instead.
    Other bugs (with the VT code) are preventing that transition from working.
  * Fix a crash on "plymouth deactivate" when no renderer is active.
    LP: #499541.
  * Fix a crash on "plymouth deactivate" when --show-splash has never
    been called.
  * Fix failure to quit on "plymouth quit" after "plymouth deactivate".

  * Remove the code that disables plymouth when init= is on the command-line,
    we don't want that.

  * debian/initramfs-tools/scripts/init-top/plymouth:
    - Don't check the kernel command-line; we always want plymouth running
      whether or not "splash" is present, plymouth uses that to determine
      which of the graphics or text renderers to use.
    - Start with --attach-to-session so we redirect console messages.
  * debian/plymouth.plymouth-log.upstart:
    - Once the filesystem is mounted, flush the log out.

 -- Scott James Remnant <scott@ubuntu.com>  Wed, 23 Dec 2009 03:54:42 +0000

plymouth (0.8.0~-5) lucid; urgency=low

  * Include the ply-boot-protocol.h file in the headers directory.
  * Include the plybootclient directory in the CFLAGS from pkg-config.

 -- Scott James Remnant <scott@ubuntu.com>  Mon, 14 Dec 2009 06:26:25 +0000

plymouth (0.8.0~-4) lucid; urgency=low

  * Patched to scan the buffer out to the console when deactivating the
    i915 plugin so that X can start.

  * debian/initramfs-tools/scripts/init-top/plymouth:
    - Turn off the blinking cursor, otherwise it'll appear later when
      we transition to gdm.
  * debian/plymouth.upstart:
    - Don't stop when gdm starts, gdm is smart and will handle the plymouth
      transition by itself.
  * debian/plymouth.postinst:
    - Update the initramfs when we don't change the theme (otherwise we
      don't update the binaries).

 -- Scott James Remnant <scott@ubuntu.com>  Fri, 11 Dec 2009 05:59:35 +0000

plymouth (0.8.0~-3) lucid; urgency=low

  * Update to GIT HEAD:
    - Maintainer mode enabled by default.
    - plymouth-set-default-theme now supports --help.
    - script gains window get position functions.

  * debian/initramfs-tools/scripts/init-bottom/plymouth:
    - Tell plymouth about the new root filesystem after switching to it. 
  * debian/rules:
    - Drop --enable-maintainer-mode since it's now enabled by default. 
  * debian/plymouth.upstart:
    - Remove the "start on" rules that would cause Plymouth to be started
      if you hadn't got an initramfs; since these were different to the
      rules for X.org itself, you could end up in the situation (often!)
      where X would start first (and plymouth stopped), then Plymouth
      restarted again.  LP: #495085.

 -- Scott James Remnant <scott@ubuntu.com>  Thu, 10 Dec 2009 20:04:43 +0000

plymouth (0.8.0~-2) lucid; urgency=low

  [ Scott James Remnant ]
  * debian/initramfs-tools/conf-hooks.d/plymouth:
    - Always enable the framebuffer for now, on the SSD model we end up
      crashing X while faffing with the splash screen; it's better to just
      delay it for now.
  * debian/plymouth.upstart:
    - Use the udev PRIMARY_DEVICE_FOR_DISPLAY=1 tag to know which of the
      graphics or drm device we needed to start.
    - Do not need fbcon, but we do need tty0

  [ Alberto Milone ]
  * Add the "ubuntu-logo" theme:
    - Add ubuntu-logo to themes/Makefile.{am|in}.
    - Put the theme in themes/ubuntu-logo.
  * debian/plymouth.postinst:
    - Add a provisional ubuntu logo.
    - Do not install bizcom.png.
  * debian/rules:
    - Set the default logo to /lib/plymouth/ubuntu-logo.png.
    - Pass --enable-maintainer-mode to dh_auto_configure.
  * debian/plymouth.postinst:
    - Set the default theme to "ubuntu-logo".

 -- Scott James Remnant <scott@ubuntu.com>  Mon, 07 Dec 2009 20:07:11 +0000

plymouth (0.8.0~-1) lucid; urgency=low

  [ Michael Vogt ]
  * merged from the fastboot PPA

  [ Scott James Remnant ]
  * Rebased on latest GIT from bzr import.
    - Directly applied debian/patches/01_default_fb.patch
    - Directly applied debian/patches/03_set_default_plugin.patch
    - Directly applied debian/patches/13_use_tty7.patch
    - Directly applied debian/patches/11_create_pid_file.patch
    - Dropped debian/patches/12_wait_for_sigterm.patch:
      + We're not going to shutdown plymouth when X starts, simply
        deactivate it.  Upstart pre-stop and SIGTERM handling should
        therefore be sufficient.
    - All other patches were from GIT and are already in the tree, so
      dropped them too.
  * Changed packaging to use dh 7 instead of cdbs.
  * Changed to install into /lib rather than /usr
  * Removed old init scripts and Upstart jobs to tidy up package.
  * Added symbols file for the libraries.

  * Disabled the crash handler, since it does something very silly when
    X is running.
  * Added initramfs conf that enables the framebuffer and plymouth unless
    the root disk is on SSD.  The rationale is that SSD-based systems get
    to the point where we can start plymouth in the real system just as
    fast, while HDD-based systems have to do ureadahead first and we want
    something pretty on screen while that happens.

 -- Scott James Remnant <scott@ubuntu.com>  Thu, 03 Dec 2009 19:10:53 +0000

plymouth (0.8.0+git20090929-0ubuntu0.1~fastboot1) karmic; urgency=low

  * New upstream release.
  * Update 01_default_fb.patch. 
  * debian/patches/11_create_pid_file.patch:
    - Add --pid-file=filename parameter to the client so as to write
      the pid to a file.
  * debian/patches/12_wait_for_sigterm.patch:
    - Add --wait-for-sigterm parameter to the client so as to wait for
      SIGTERM before quitting.
  * debian/patches/13_use_tty7.patch:
    - Make plymouth use tty7 instead of tty1.

 -- Alberto Milone <alberto.milone@canonical.com>  Wed, 11 Nov 2009 14:33:33 +0100

plymouth (0.7.2-0ubuntu0.1~fastboot1) karmic; urgency=low

  * New upstream release.
  * Adapt the "plain" plugin (written by Michael Terry).
  * 06_force_graphics_mode.patch:
    - Make sure that graphics mode is always used.
  
  [ Michael Terry ]
  * debian/patches/05_add_plain_plugin.patch:
    - Add a plugin called 'plain' that just shows the logo in the center
      of the screen, no animation, no progress.
  * debian/initramfs-tools/hooks/plymouth:
    - Work with hardy initramfs helper functions
  * debian/patches/05_add_plain_plugin.patch:
    - Never revert to TEXT mode, rather stay in GRAPHICS mode.
  * debian/plymouth-shutdown:
    - Add shutdown script to show plymouth when rebooting or shutting down.

 -- Alberto Milone <alberto.milone@canonical.com>  Fri, 23 Oct 2009 15:31:43 +0200

plymouth (0.8.0+git20090929-0ubuntu1~mvo1) karmic; urgency=low

  * merged from the fastboot PPA

 -- Michael Vogt <michael.vogt@ubuntu.com>  Thu, 23 Jul 2009 11:14:55 +0200

plymouth (0.7.0+git20090723-0ubuntu1~ppa1) karmic; urgency=low

  [ Marcelo Boveto Shima ]
  * Move the script plymouth from /usr/share/initramfs-tools/scripts/init-top to
    /usr/share/initramfs-tools/scripts/local-top.
    Fix plymouth loading with kms.

  [ Michael Vogt ]
  * updated to the current git

 -- Michael Vogt <michael.vogt@ubuntu.com>  Thu, 23 Jul 2009 11:14:55 +0200

plymouth (0.7.0+git20090506-0ubuntu0.1~ppa2) jaunty; urgency=low

  * exchange sym-links with real files in ./build-tools

 -- Mirco Müller (MacSlow) <mirco.mueller@ubuntu.com>  Thu, 07 May 2009 10:17:12 +0100

plymouth (0.7.0+git20090506-0ubuntu0.1~ppa1) jaunty; urgency=low

  * update to latest plymouth upstream tarball
  * dropped debian/patches/02_splash_cmdline.patch since this is now in upstream
  * dropped debian/patches/04_support_solar_default.patch since this is now in
    upstream

 -- Mirco Müller (MacSlow) <mirco.mueller@ubuntu.com>  Wed, 06 May 2009 16:24:32 +0100

plymouth (0.7.0+git20090207-0ubuntu0.1~ppa5) UNRELEASED; urgency=low

  [ Michael Terry ]
  * debian/compat, debian/control, debian/libplymouth-dev.install,
    debian/libplymouth2.install, debian/plymouth.install:
    - Reduce debhelper dependency to 6, for ease of hardy backports.
    - Prepend install paths with debian/tmp/, as debhelper 6 likes.
  * debian/initramfs-tools/hooks/plymouth:
    - Always pass copy_exec a target path that already exist, for 
      compatibility with hardy's initramf-tool's hook-functions.

 -- Michael Terry <michael.terry@canonical.com>  Mon, 16 Mar 2009 09:10:38 -0400

plymouth (0.7.0+git20090207-0ubuntu0.1~ppa4) jaunty; urgency=low

  * Use "Plymouth" instead of "Usplash" in the splash-functions comments.
  * Add watch file.
  * Use install's -D flag instead of mkdir.
  * Add #DEBHELPER# in postinst.
  * Add postrm to update-initramfs on removal.
  * Cleanup maintainer scripts.
  * Use set -e in postinst.
  * Drop "rhgb" from startup suggestions as "splash" is supported now.
  * Exclude Plymouth plugins in /usr/lib/plymouth/ for dh_makeshlibs.
  * Split in multiple packages: add library and development packages.
    - Add Replaces on older plymouth versions.
  * Install Debian/Ubuntu scripts via dh_install as well.
  * TODO: add note to check for the usefulness of some dirs "make install"
    creates.

 -- Loic Minier <lool@dooz.org>  Tue, 17 Feb 2009 16:37:12 +0100

plymouth (0.7.0+git20090207-0ubuntu0.1~ppa3) jaunty; urgency=low

  * debian/initramfs-hooks:
    - simplify the initramfs hook generation (thanks to lool)
  * debian/splash-functions:
    - add plymouth --wait after --quit (thanks again to the
      unstopable lool :)

 -- Michael Vogt <michael.vogt@ubuntu.com>  Tue, 17 Feb 2009 14:33:08 +0100

plymouth (0.7.0+git20090207-0ubuntu0.1~ppa2) jaunty; urgency=low

  * debian/rules:
    - install hook with propper permissions

 -- Michael Vogt <michael.vogt@ubuntu.com>  Thu, 12 Feb 2009 11:10:27 +0100

plymouth (0.7.0+git20090207-0ubuntu0.1~ppa1) jaunty; urgency=low

  * initial test release
  * debian/patches/01_default_fb.patch:
    - default to framebuffer /dev/fb0
  * debian/patches/02_splash_cmdline.patch:
    - support "splash" on the kernel commandline
  * debian/patches/03_set_default_plugin.patch:
    - update the helper plymouth-set-default-plugin to work on
      ubuntu and call initramfs-update 
  * debian/patches/04_support_solar_default.patch:
    - add missing "solar" to configure.in tests
  * debian/splash-functions:
    - add compat functions so that it works as a usplash
      replacement
  * debian/initramfs-hooks:
    - hook into our initramfs generation
    - copy only needed plugin bits onto the initramfs
  * debian/initramfs-script-init-top:
    - hook into initramfs run

 -- Michael Vogt <michael.vogt@ubuntu.com>  Wed, 11 Feb 2009 08:29:48 -0800
